3 way Jandy valve

I purchased a 3 way Jandy valve ($50) for the new plumbing. When you get the valve it only allows you to divert water to one of 2 90 degree outlets. However if you remove the handle you will notice 2 pins which control how far you can turn the handle. Remove the pins, reattach the handle, and put the handle in the middle outlet position so the closing valve cover is at the side with no outlet. Now you can put the pins back in at the farthest holes from the center which are usually labeled left90 and right 90. This will allow the valve the most potential pathways for flow.